Company Information

SHENZHEN AMP XUNLI TECHNOLOGY CO., LTD.
City:
Shenzhen
Industry:
Telecommunications
Country/Region:
China China
Business Type:
Professional
 

Portal Profile

 
Home >> Category All >> Telecommunications >> Communication Equipment >> Communication Cables >>

Indoor Cat5e UTP 100MHz Fluke Pass Network LAN Cab

Indoor Cat5e UTP 100MHz Fluke Pass Network LAN Cab

Product Name Indoor Cat5e UTP 100MHz Fluke Pass Network LAN Cab
Company SHENZHEN AMP XUNLI TECHNOLOGY CO., LTD.
Short description Indoor Cat5e UTP 100MHz Fluke Pass Network LAN Cab
Detail The AMPXL BOX UTP CAT5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). The AMPXL cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors. Main features of AMPXL UTP cat 5e cable: highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee, parameters far exceeding the requirements for Category 5+ twisted pair cables preliminary quality control of materials and thorough tests of the final product, meter markers, deviation less than 0.5%, solid wires of 0.50 mm diameter (24 AWG), wire insulation made of homogeneous, colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue, insulated wires twisted in pairs of 1.8 mm diameter, pairs twisted together, outer diameter of ca. 4.0 mm, sheath made of gray/ blue PVC, of 5.0 mm diameter. The AMPXL UTP cat 5e LAN cable is manufactured in compliance with: IEC 61156-6, ISO/IEC 11801, ANSI/TIA/EIA-568-B, yd/t1019-2001 standards. The AMPXL UTP cat 5e cable can be used in a wide temperature range: -20°C...+70°C, and installed between 0°C and +50°C. The minimum bending radius factor (radius to diameter ratio) is 8. Specifications Name AMPXL Cat UTP 5e Code 500 Structure Wires solid copper conductors Ø 0.50 mm (24 AWG) Wire insulation HDPE Sheath PVC (gray/ blue) Outer diameter [mm] 5.0 ±0.3 Copper content [kg/km] 14.9 Weight [kg/km] 28.5 Electrical parameters Impedance [Ω] 100 ±15 Capacitance of any transmission path at 1kHz [nF/km] 50 ±1 Nominal Velocity of Propagation (NVP) [%] 67 Resistance of any transmission path [Ω/km] ≤ 188 Asymmetry in capacitance of transmission paths to the ground [pF/km] ≤ 1600 Insulation resistance [MΩ/km] > 500 Installation and operation Operating temperature range [°C] -20...+70 Operating humidity range [%] 0...100 Installation temperature range [°C] 0...+50 Minimum bending radius [radius to diameter ratio] >8 The results of the measurements of the U/UTP kat. 5e cable conducted by the National Institute of Telecommunications in Shenzhen, China Pair resistance and resistance asymmetry testing. Cable Pair Wire Wire resistance [Ω/km] Resistance asymmetry [%] UTP cat. 5e 1 a 92,726 0,35 b 93,054 2 a 94,662 0,34 b 94,982 3 a 96,228 0,55 b 96,755 4 a 96,107 0,39 b 95,733 Required - - <150 ≤3,0 Effective capacitance and capacitance asymmetry testing. Cable Pair Effective capacitance [nF/km] Capacitance asymmetry [pF/km] UTP cat. 5e 1 47,35 77 2 44,87 132 3 45,71 36 4 46,70 5 Required - - ≤1600 Insulation testing. Cable Pair Wire Insulation resistance [MΩ/km] UTP cat. 5e 1 a 8,8·104 b 1,2·105 2 a 9,0·104 b 1,6·105 3 a 8,1·104 b 2,0·105 4 a 7,5·104 b 1,1·105 Required - - ≥50 Tests of electric strength of insulation. Test method Test voltage VAC Applied (passed) Required Voltage applied between connected in parallel all a wires and all b wires 1000 1000 End-to-end attenuation testing. Cable Pair Effective attenuation [dB] UTP cat. 5e 1 22,9 2 22,8 3 21,5 4 21,2 Required - ≤24,9 Near End Cross Talk (NEXT) testing. Cable Pair to pair NEXT [dB] UTP cat. 5e 1 - 2 43,5 1 - 3 47,9 1 - 4 45,3 2 - 3 44,9 2 - 4 47,8 3 - 4 41,4 Required - ≥34,0 Return loss testing. Cable Pair Return loss [dB] UTP cat. 5e 1 20,8 2 21,2 3 20,9 4 19,9 Required - ≥19,4 Total Near End Cross Talk (PS-NEXT) testing. Cable Pair PS-NEXT [dB] UTP cat. 5e 1 36,94 2 33,93 3 33,63 4 35,44 Required - ≥31,0 Transmission parameters The parameters show that AMPXL U/UTP 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Title Indoor Cat5e UTP 100MHz Fluke Pass Network LAN Cable
Brochure
Condition New
Supplier
   

Product Images

Indoor Cat5e UTP 100MHz Fluke Pass Network LAN CabIndoor Cat5e UTP 100MHz Fluke Pass Network LAN Cab
;
   

Similiar Products

   

Other Products